Overview

	See More Detail at Depth Designed for deep imaging in biological specimens, the FVMPE-RS multiphoton microscope helps reveal how cells function and interact within living tissue. This product has been discontinued, check out our current product

See More Detail at Depth

Designed for deep imaging in biological specimens, the FVMPE-RS multiphoton microscope helps reveal how cells function and interact within living tissue.

This product has been discontinued, check out our current product

High-Sensitivity, High-Resolution Deep Multiphoton Imaging

The FVMPE-RS multiphoton microscope employs advanced technology and optical design to enhance sensitivity and resolution during deep imaging.

Broad 400 nm to 1600 nm spectral transmission window efficiently delivers near-infrared excitation without compromising short wavelength detection
Large-area detection path collects more emission signal, especially large-angle scattered photons
TruResolution objectives offer automated spherical aberration compensation to increase brightness and resolution, revealing fine details at every plane within a deep image stack

Learn more

TruResolution - Maximize Resolution in Deep Imaging

3D reconstructed image of an in vivo mouse brain (Thy1-YFP-H mouse, sensory cortex) acquired using a TruResolution objective with an auto adjustment function (left) and maximum projection images acquired at an approximately 600 μm depth. Images acquired without (top right) and with (bottom right) the auto adjustment function.

Images were acquired at the RIKEN BSI-Olympus Collaboration Center, courtesy of Dr. Hiromu Monai, Dr.Hajime Hirase, and Dr. Atsushi Miyawaki.

Related Videos Zebrafish embryo blood flow. Above: 438 fps / Below: 30 fps	High-Speed Imaging for Fast, Dynamic Cellular Processes High-speed resonant scanning and high-resolution linear scanning are standard. Full frame imaging at 30 frames-per second (fps) reduces motion artifacts during in vivo and live cell imaging 438 fps maximum imaging speed enables you to capture rapid, dynamic phenomena, such cell transport during blood flow and calcium signaling events in neurons and other cells Learn more

Zebrafish embryo blood flow.
Above: 438 fps / Below: 30 fps

High-Speed Imaging for Fast, Dynamic Cellular Processes

High-speed resonant scanning and high-resolution linear scanning are standard.

Full frame imaging at 30 frames-per second (fps) reduces motion artifacts during in vivo and live cell imaging
438 fps maximum imaging speed enables you to capture rapid, dynamic phenomena, such cell transport during blood flow and calcium signaling events in neurons and other cells

Learn more

Multiwavelength Excitation for Broader Spectral Coverage

The FVMPE-RS imaging platform supports a dual wavelength infrared pulsed laser or two independent tunable infrared lasers for multichannel, multiphoton excitation imaging.

Optimally excite different fluorophores without having to repeatedly tune the laser
Independent power control of each laser line makes it easier to simultaneously capture fluorophores with differing efficiencies
Laser wavelengths beyond 1000 nm enables access to the growing library of red-shifted fluorescent dyes and proteins and practical third-harmonic generation imaging

Learn more

Multiwavelength Excitation for Broader Spectral Coverage

Third harmonic generation imaging of porcine adipose tissue. Unlabeled porcine adipose tissue was irradiated with femtosecond laser at 1250 nm, second harmonic is detected from collagen fibers at 625 nm and third harmonic from lipid interfaces at 416 nm.

	Optional Features for Advanced Applications The FVMPE-RS multiphoton microscope is a modular platform, enabling you to easily upgrade your system as your research needs grow. Options include: An independent scanner path for optogenetics and other photomanipulation experiments Analog input channels to support electrophysiology experiments Digital TTL input/output lines to coordinate sensory stimuli with multiphoton imaging during behavioral experiments Learn more

Optional Features for Advanced Applications

The FVMPE-RS multiphoton microscope is a modular platform, enabling you to easily upgrade your system as your research needs grow.

Options include:

An independent scanner path for optogenetics and other photomanipulation experiments
Analog input channels to support electrophysiology experiments
Digital TTL input/output lines to coordinate sensory stimuli with multiphoton imaging during behavioral experiments

Learn more

Intuitive Software Optimized for Multiphoton Observation

The customizable software layout gives you more flexibility, increasing your efficiency:

Tailor the UI to your experiments
Choose to see only the tools you need for fast access to advanced features
Save acquisition parameters from each experiment and recall them for repeatable and consistent imaging

Online analysis and image processing, including spectral unmixing and 3D rendering, come standard.

Learn more

Customizable Layout

3 Microscope Frame Options

Upright Microscope System — Designed for Multiphoton Microscopy

Upright Microscope System — For in vivo and in vitro multiphoton microscopy

The large stage clearance and long focus stroke of the standard upright frame accommodate a wide range of specimens, from tissue slices to live mice and other small animals.

Learn more about the Upright Microscope System

Gantry Microscope System — For in vivo Observation that Require Maximum Space

Gantry Microscope System — For in vivo observations that require more space

The 355 mm height clearance between the objective and the base plate facilitates in vivo observations that require large apparatus, such as behavioral imaging in awake mice.

Learn more about the Gantry Microscope System

Inverted Microscope System — For Observing Tissue Cultures, 3D Cultures, and Cell Cultures (Spheroid)

Inverted Microscope System — For in vitro observation of 3D cell (spheroid) and tissue cultures

The inverted frame provides a stable platform for time-lapse imaging of thick living specimens, especially tissue cultures and 3D spheroid and organoid cell cultures. This configuration is also useful for intravital imaging of organs and tissues through a body window in a small animal.

Learn more about the Inverted Microscope System

Applied Technologies

Maximize Resolution in Deep Imaging

Get better resolution and contrast during deep imaging within thick specimens with TruResolution objectives.

These objectives have an automated correction collar that dynamically compensates for spherical aberration while maintaining accurate focus position. They automatically adjust at every plane of a volume image, delivering sharper and brighter 3D images at depth.

. ,	User-Friendly, Accurate Imaging with Automated Laser Alignment Laser drift caused by wavelength tuning, temperature fluctuation, and other sources of cavity shift can cause a misalignment of the excitation beam in typical systems. The FVMPE-RS multiphoton microscope maintains precise 4-axis laser alignment of the excitation beam into the scanner unit, even in the face of laser drift, simplifying system upkeep. The beam position and angle are automatically adjusted to deliver higher laser power and consistent pixel registration. If your system has two excitation laser lines, this feature maintains co-alignment between the beams, helping eliminate co-registration errors between channels.

User-Friendly, Accurate Imaging with Automated Laser Alignment

.

,

User-Friendly, Accurate Imaging with Automated Laser Alignment

Laser drift caused by wavelength tuning, temperature fluctuation, and other sources of cavity shift can cause a misalignment of the excitation beam in typical systems.

The FVMPE-RS multiphoton microscope maintains precise 4-axis laser alignment of the excitation beam into the scanner unit, even in the face of laser drift, simplifying system upkeep. The beam position and angle are automatically adjusted to deliver higher laser power and consistent pixel registration.

If your system has two excitation laser lines, this feature maintains co-alignment between the beams, helping eliminate co-registration errors between channels.

High-Speed Scanning at up to 438 Frames-per-Second

The fast resonant scanner and linear galvanometer scanner provide high-speed and high-resolution imaging in a single system. With capture rates of up to 438 fps at 512 × 32 pixels or 30 fps at 512 × 512 pixels across the full field of view (FN 18), you can:

Avoid motion artifacts when imaging dynamic samples
Track fast-moving cells in blood flow
Observe rapid membrane potential dynamics across neurons and other cells

High-Speed Scanning at up to 438 Frames-per-Second

	Efficient Laser Transmission Silver-coated scanner mirrors help deliver more laser power to your sample for brighter images. Increased reflectance in the near-infrared range compared to conventional aluminum-coated mirrors is especially advantageous for deep in vivo experiments.

Efficient Laser Transmission

Silver-coated scanner mirrors help deliver more laser power to your sample for brighter images.

Increased reflectance in the near-infrared range compared to conventional aluminum-coated mirrors is especially advantageous for deep in vivo experiments.

Detector Options Maximize Fluorescence Imaging Performance

Acquire high signal-to-noise ratio (SNR) images from faint fluorescence with high-sensitivity gallium arsenide phosphide (GaAsP) photomultiplier tube (PMT) detectors. They offer a higher quantum efficiency than standard multialkali (MA) PMTs and have fanless cooling to further improve the SNR.

If you work with brightly emitting samples, you can combine the high SNR of GaAsP detector with the wider dynamic range of MA detector.

For greater light efficiency, the system’s non-descanned detection path features large-area optics to better capture scattered fluorescence photons and make full use of the wide collection capacity of our multiphoton objectives.

Detector Options Maximize Fluorescence Imaging Performance

MPE Objectives Designed for Deep Imaging

Observe up to 8 mm Deep in Cleared Tissue

Wide fields of view enable Olympus specialized multiphoton objectives to efficiently collect scattered fluorescence photons and generate brighter images from deep within in vivo and in vitro specimens.

Diverse lineup enables you to select an objective based on your research requirements
Different optical designs emphasize high numerical aperture, long working distance, wide field of view, and compatibility with a range of immersion media and tissue clearing agents
Correction collar compensates for refractive index, cover slip thickness, and tissue depth
TruResolution objectives provide fully automated spherical aberration correction

Learn more about the Multiphoton Objectives

Visible to IR Transmission with Advanced Optical Coatings

Our multiphoton objectives and scanner optics have the Olympus 1600 optical coating that offers excellent transmission from 400 nm to 1600 nm.

Efficient infrared transmission translates to more available power for fluorescence excitation at depth while strong support at short wavelengths maintains efficient collection of fluorescence and harmonic emissions.

Observe up to 8 mm Deep in Cleared Tissue

.

,

Transmittance Curve of Objective

Maximize Signal with Deep Focus Mode

Deep focus mode adjusts the diameter of the laser beam based on the laser scattering conditions. For in vivo specimens with heavy laser scattering, the beam is narrowed so that more excitation photons reach deeper within your sample, helping produce brighter images.

Laser Beam Diameter

Deep Focus Mode

	Independent Photostimulation Control For precise microsecond photostimulation and photobleaching experiments, add: An independent galvanometer scanner (SIM scanner) Visible laser module Arbitrary stimulation regions of interest (ROI) can be defined independent of an imaging ROI. Random access multipoint sequential stimulation is also available when greater speed is required. On systems with two IR imaging lines, the SIM scanner enables simultaneous multiphoton stimulation and imaging. Learn more about the SIM scanner

SIM Scanner

Independent Photostimulation Control

For precise microsecond photostimulation and photobleaching experiments, add:

An independent galvanometer scanner (SIM scanner)
Visible laser module

Arbitrary stimulation regions of interest (ROI) can be defined independent of an imaging ROI. Random access multipoint sequential stimulation is also available when greater speed is required.

On systems with two IR imaging lines, the SIM scanner enables simultaneous multiphoton stimulation and imaging.

Learn more about the SIM scanner

Microsecond Timing for Electrophysiology and Optogenetics

A hardware sequencer provides microsecond precision timing for stimulation and triggering events.

Stimulation can be spatially and temporally synchronized to the imaging scan, facilitating the capture of fast response dynamics at precise locations. For electrophysiology and optogenetics, this could mean the difference between distinguishing a synchronous versus an asynchronous stimulus response.

For acquisitions lasting two weeks or longer or experiments with complex procedures that require switching between imaging tasks, the sequence manager software module maintains millisecond precision, providing high-quality data in demanding in vivo and in vitro experiments.

Learn more about multi-dimensional and multi-area time-lapse imaging

Microsecond Timing for Electrophysiology and Optogenetics

Solutions

Synchronize Electrophysiological Data and Laser Light Stimulation with the Analog Unit

Analog inputs and digital TTL I/O are available to support electrophysiology experiments. The analog input unit records external voltage signals as image data. Light-stimulated electrical signals measured with patch clamps can be synchronized with image capture and displayed as a pseudocolor intensity overlay.

Learn more about the Analog Unit

Multipoint mapping advanced software (MMASW) enables precise light stimulation of multiple arbitrarily selected points or points in a rectangular region of interest (ROI) for mapping scans. It can simultaneously record electrical voltage signals from the patch clamping system.

Multipoint scan: Designate the number of points on an image for light stimulation. Different laser lines can be selected for each independent stimulation point.
Mapping scan: The software prevents neighboring points from being excited, enabling more accurate observation of the reaction of the target.
Define the timing, duration, and interval of the stimulation to the microsecond, and program the experiment with continuous or pulsed stimulation.

Learn more about the Multi Point and Mapping Software Module

Multipoint or Mapping Stimulation

Point Laser Control

*Multicolor point-by-point laser control supported using SIM scanner with multiple lasers for mixed ChR2 and NpHR experiments.

	Create 3D Stimulation Reaction Maps Specialized mapping scans utilize a pseudorandom sequence to deliver more precise spatial reaction maps when measuring electrophysiological response to optical stimulation. Direct electrical patch clamp recordings and fluorescence signals from calcium or voltage indicators can be overlaid on a high-resolution image. Intensity thresholds can be used to define a high-speed multipoint scan of the most active regions. This can be extended to 3D reaction maps with an optional piezo Z drive.

3D Stimulation Reaction Maps

Create 3D Stimulation Reaction Maps

Specialized mapping scans utilize a pseudorandom sequence to deliver more precise spatial reaction maps when measuring electrophysiological response to optical stimulation. Direct electrical patch clamp recordings and fluorescence signals from calcium or voltage indicators can be overlaid on a high-resolution image. Intensity thresholds can be used to define a high-speed multipoint scan of the most active regions. This can be extended to 3D reaction maps with an optional piezo Z drive.

Combine a Wide Field of View with High Resolution See your entire specimen at high resolution and in wider context with the multiarea time lapse (MATL) function: Automatically capture and stitch multiple adjacent images over a very wide field of view using a motorized stage Program time lapse acquisition over the entire composite field, or even non adjacent areas Easily locate the position of specific cells in the larger image with the mapping feature	Image data courtesy of Urs Ziegler and Jose Maria Mateos, Center for Microscospy and Image Analysis, University Zurich. Mouse line L15 kindly provided by Pico Caroni, FMI, Basel.

Combine a Wide Field of View with High Resolution

See your entire specimen at high resolution and in wider context with the multiarea time lapse (MATL) function:

Automatically capture and stitch multiple adjacent images over a very wide field of view using a motorized stage
Program time lapse acquisition over the entire composite field, or even non adjacent areas
Easily locate the position of specific cells in the larger image with the mapping feature

Wide Field of View

Image data courtesy of Urs Ziegler and Jose Maria Mateos, Center for Microscospy and Image Analysis, University Zurich. Mouse line L15 kindly provided by Pico Caroni, FMI, Basel.

Software

Precisely Control Your Experiments

The sequence manager makes it easy to coordinate experiments. You can easily organize and expedite complex protocols with precise timing, including:

Changing the frame rate during time-lapse imaging
Automatically switching between different excitation wavelengths
Repeating photostimulation events at different positions during image acquisition

You can save and reload protocols for consistent experiment execution.

Sequence Manager

Separate Overlapping Channels with Spectral Deconvolution

Closely overlapping fluorescence spectra can complicate biological studies that look at multiple labels simultaneously. Now, overlapping spectral channels can be separated using spectral deconvolution based on a blind unmixing algorithm or previously saved multichannel profiles. Crosstalk between the channels can even be eliminated during image acquisition through live processing.

Normal Mode

Spectral overlap of red and green fluorescence causes cross-talk between the channels during normal acquisition.

Live Unmixing Mode

Live unmixing mode applies spectral deconvolution during image acquisition to better separate distinct fluorophores.

3D Rendering

Large amounts of Z-stack data can be rendered into a 3D display. Important views can be registered as key frames, making it easy to create animated views of 3D images that zoom and transition to different camera angles.

4mm 3D Stack on Blood Vessel Label with Texas Red in Mouse Brain

4 mm 3D stack on blood vessel labeled with Texas red in mouse brain.
Image data courtesy of: Hiroshi Hama, Rie Ito, Atsushi Miyawaki, Laboratory for Cell Function Dynamics, RIKEN Brain Science Institute

(Left) Raw 30 fps data acquired at low laser power (0.05%, 488 nm). (Right) Rolling average processing (10 frame) on 30 fps data acquired at low laser power.	Rolling Average Processing High-speed scanning at low laser power to avoid phototoxicity can decrease the signal-to-noise ratio. With rolling average post-processing, you have the flexibility to adjust high-speed time-lapse images while maintaining the time scale and keeping the original data.

Rolling Average Processing

(Left) Raw 30 fps data acquired at low laser power (0.05%, 488 nm).
(Right) Rolling average processing (10 frame) on 30 fps data acquired at low laser power.

Rolling Average Processing

High-speed scanning at low laser power to avoid phototoxicity can decrease the signal-to-noise ratio. With rolling average post-processing, you have the flexibility to adjust high-speed time-lapse images while maintaining the time scale and keeping the original data.

Macro-to-Micro Observation

The use of a high-numerical aperture (NA) objective, motorized stage, and Olympus software enables mosaic imaging:

Acquire continuous 3D (XYZ) and 4D (XYZT) images of adjacent fields of view
Automate your entire process from image acquisition to stitching
Quickly prepare composite images using the stitching function
Tiled images can be enlarged in sections without resolution loss

Macro to Micro Observation

	Depth-Brightness Compensation When observing thick specimens, images can get darker as the focal point goes deeper. But with Bright Z depth-brightness compensation, detector sensitivity and laser power are continually adjusted to maintain consistent brightness. This function complements the dynamic TruResolution objectives that also automatically adjust spherical aberration compensation with depth.

Depth-Brightness Compensation

When observing thick specimens, images can get darker as the focal point goes deeper. But with Bright Z depth-brightness compensation, detector sensitivity and laser power are continually adjusted to maintain consistent brightness. This function complements the dynamic TruResolution objectives that also automatically adjust spherical aberration compensation with depth.

Expanded Analysis Functions

The FVMPE-RS imaging platform’s software is integrated with Olympus cellSens image analysis software, expanding the system’s analytical capabilities.

Optional features include:

3D deconvolution for Z-stack images
Area estimation for each particle in an image
An image processing filter
Colocalization analysis

Optional NoviSight 3D analysis software is also available.

Learn more about the cellSens imaging software
Learn more about NoviSight software

Specifications

FLUOVIEW FVMPE-RS

		One Laser System	Dual Lines System	Twin Lasers System
Unit	Qualified IR Pulsed Lasers with Negative Chirp for Multiphoton Excitation	Spectra-Physics products: MAITAI HPDS-OL: 690 nm–1040 nm MAITAI eHPDS-OL: 690 nm–1040 nm INSIGHT X3-OL: 690 nm–1300 nm INSIGHT X3 DUAL/DUALC-OL: 680 nm–1300 nm + 1045 nm Coherent products: Chameleon Vision I Olympus: 680 nm–1080 nm Chameleon Vision II Olympus: 680 nm–1080 nm Chameleon Vision S Olympus: 690 nm–1050 nm
	Main IR Pulsed Laser	MAITAI HPDS-OL MAITAI eHPDS-OL INSIGHT X3-OL Chameleon Vision I Olympus Chameleon Vision II Olympus Chameleon Vision S Olympus	INSIGHT X3 DUAL-OL INSIGHT X3 DUALC-OL	MAITAI HPDS-OL MAITAI eHPDS-OL INSIGHT X3-OL Chameleon Vision I Olympus Chameleon Vision II Olympus Chameleon Vision S Olympus
	Additional IR Line Laser: Use as second imaging line/laser or for simultaneous stimulation (optional SIM scanner)	–	1045 nm fixed line from INSIGHT X3 DUAL /DUALC-OL	MAITAI HPDS-OL MAITAI eHPDS-OL Chameleon Vision I Olympus Chameleon Vision II Olympus Chameleon Vision S Olympus
	Automatic Introduction Optic	Introduction optic with AOM attenuation (0%–100%, 0.1% increments) Including fully automated beam expander, XY shifter and two-axis angle alignment. (4-axis quadralign autoalignment optics) Direct coupling to laser port of scanning unit.	Introduction optic with 2 sets of AOM attenuation (0%–100%, 0.1% increments) Including 2 sets of fully automated beam expanders, XY shifter and two-axis angle alignment. (4-axis quadralign autoalignment optics) Direct coupling to laser port of scanning unit.
	IR Laser Combining Optic	–	Motorized light path switcher with DM900, DM1000R, DM1100 to combine two IR wavelength for imaging
	Optional Visible Light Laser for Stimulation	405 nm/50 mW, 458 nm/20 mW, 588 nm/20 mW laser source with AOTF attenuation. 0%–100%, 0.1% increments, < 2 μs rising time
Scanning Unit	Scanning Method	Light deflection via 2 silver-coated galvanometer scanning mirrors, or silver-coated resonant scanning mirror
	Scanning Speed	Galvanometer scanner (normal imaging): 512 × 512 with 1.1 s–264 s, pixel time: 2 μs–1000 μs Resonant scanner (high-speed imaging): 30 fps at 512 × 512, 438 fps at 512 × 32
	Scanning Mode	XY, XYZ, XYT, XYZT, free line, XZ, XT, XZT, PointT
	Galvanometer Scanner (Normal Imaging)	Galvanometer ROI scanning: rectangle clip, ellipse, polygon, free area, line, free line, and point Zoom: 1.0x–50.0x with 0.01x increments, supports 0°–360° rotation and pan Scanning Field Number: 18 Image Size: 64 × 64–4096 × 4096
	Resonant Scanner (High-Speed Imaging)	Resonant ROI scanning: rectangle clip, line Zoom: 1.0x–8.0x with 0.01x increments Scanning field number:18 Image size: 512 × 512
	Optical Coating	IR support optic with 1600 coating
	Non-descanned MPE Imaging Detectors	Reflected detection: 2 or 4 channel configuration: 2 PMT configuration, 4 PMT configuration or 2 PMT + 2 cooled GaAsP-PMTs Transmitted detection: 2 PMT unit with high NA condenser
	Transmitted-Light Detector	Module with integrated external transmitted light photomultiplier detector and 100 W halogen lamp, motorized switching, fiber adaptation to microscope frame
	Z-Drive	Integrated motorized focus module of the microscope, minimum increment 0.01 μm Optional: highly rigid piezo nosepiece^*1
	Optional Simultaneous Stimulation Scanner	Highly synchronized simultaneous stimulation scanner, including a set of galvanometer scanner, VIS and IR laser port. ROI scanning: rectangle clip, ellipse, polygon, tornado, free area, line, free line, and point.
	Optional Analog and Digital in/out Box	4-channel analog signal input, 6-channel digital TTL trigger input, 5-channel digital TTL trigger output. Scanner timing output
Operation Environment		Room temperature: 20°C–25°C, humidity: 75% or less at 25°C, requires continuous (24-hour) power supply
Size of Anti-Vibration Table		1500 mm × 1650* mm *1800 mm with inverted microscope system	1500 mm × 1650* mm *1800 mm with inverted microscope system	1500 mm × 2000 mm
Software	Basic Feature	Dark room matching GUI design. User arrangeable layout. Acquisition parameter reload features. Hard disk recording capability, Adjust laser power and HV with Z-stack acquisition. Z-stack with alpha blending, Maximum intensity projection, Iso-surface rendering
	IR Laser Control	Fully integrated IR laser wavelength control and Deep Focus mode
	Optional Motorized Stage software	XY motorized stage control. Map image acquisition for easy target locating. Tiling acquisition and software image stitching. Define multiple area for time lapse imaging.
	Optional Mapping and Multiple Point Stimulation Software	Multiple point stimulation and data acquisition software. Mapping multiple point stimulation to generate reaction map. Filtering feature to select points. Multiple point stimulation. Single or repeat stimulation. Each point independent stimulation wavelength selection.
	Optional Sequence Manager	Advanced programmable software to define multiple imaging/stimulation tasks and execute by hardware sequencer. Minimum gap 100 ms delay between tasks.
	Optional Auto Compensation Software	Automatic spherical aberration compensation software. Control of objective lens with auto spherical aberration compensation function. Auto adjustment of motorized correction collar to find the best position at certain observation depth. Auto adjustment of correction collar along with Z movement.

^*1 Not available in some areas.

TruResolution Objectives

	FV30-AC10SV	FV30-AC25W
Magnifications	10	25
NA	0.6	1.05
W.D.	8 mm	2 mm
Cover Glass Thickness	0 mm–0.23 mm	0 mm–0.23 mm
Immersion Liquid	SCALEVIEW-A2 (water, silicone oil, and normal oil available)	Water
Special Features	Auto compensation, optimized for multiphoton imaging	Auto compensation, optimized for multiphoton imaging
Dimensions (W × D × H)	56 mm × 106.5 mm × 95 mm	56 mm × 106.5 mm × 101 mm
Weight	Approx. 1kg	Approx. 1kg

FVMPE-RS

Overview

See More Detail at Depth

High-Sensitivity, High-Resolution Deep Multiphoton Imaging

Related Videos

High-Speed Imaging for Fast, Dynamic Cellular Processes

Multiwavelength Excitation for Broader Spectral Coverage

Optional Features for Advanced Applications

Intuitive Software Optimized for Multiphoton Observation

3 Microscope Frame Options

Upright Microscope System — For in vivo and in vitro multiphoton microscopy

Gantry Microscope System — For in vivo observations that require more space

Inverted Microscope System — For in vitro observation of 3D cell (spheroid) and tissue cultures

Applied Technologies

Maximize Resolution in Deep Imaging

Related Videos

User-Friendly, Accurate Imaging with Automated Laser Alignment

High-Speed Scanning at up to 438 Frames-per-Second

Efficient Laser Transmission

Detector Options Maximize Fluorescence Imaging Performance

MPE Objectives Designed for Deep Imaging

Observe up to 8 mm Deep in Cleared Tissue

Visible to IR Transmission with Advanced Optical Coatings

Maximize Signal with Deep Focus Mode

Independent Photostimulation Control

Microsecond Timing for Electrophysiology and Optogenetics

Solutions

Synchronize Electrophysiological Data and Laser Light Stimulation with the Analog Unit

Create 3D Stimulation Reaction Maps

Combine a Wide Field of View with High Resolution

Software

Precisely Control Your Experiments

Separate Overlapping Channels with Spectral Deconvolution

Normal Mode

Live Unmixing Mode

3D Rendering

Rolling Average Processing

Macro-to-Micro Observation

Depth-Brightness Compensation

Expanded Analysis Functions

Specifications

FLUOVIEW FVMPE-RS

TruResolution Objectives

Redirecting